|
 With over 17 years of experience preparing candidates for the contractor exams for the trade and Business, Law and Management, Contractor School Online (CSO) is your primary resource to help you pass your state contractor license exam! We offer online practice tests, study materials, books, CD-ROMs, crash courses and more depending on the state.
To become a certified contractor you must pass a Business and Law exam in many states and, depending on the classification you need, you may need to pass a trade exam as well. If you are unsure what your classification requires, please use our Information Request Form.
Contractor School Online (CSO) will assist you with their professional consultants and provide study materials, also practice tests for theBusiness, Law, and Management and your trade if available. If purchases are made elsewhere make sure the correct author, title and year are appropriate for the trade.
CSO Business and Law Practice Test coincides with the required State Contractor's Manual.
Please note: Inventory Pricing - Contractors State Bonding and Subjects may change without notice.
Testing Center Sample Questions
($95)
Content
-
Framing, Millwork, Cabinets, Finish & Rough Carpentry Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Low Voltage Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Electrical Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Heating and Air Conditioning Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Plumbing Online Practice Test
-
3 Months Access, Available 24/7
|
|
ARKANSAS
State Building Codes
- The current edition of the codes, took effect on August 1, 2008. The Fire Prevention Code is a three volume set. Volume I is known as the “Fire Code”, Volume II is known as the “Building Code”, and Volume III is known as the “Residential Code”. The Codes are based on the Fire, Building, and Residential Codes, with some Arkansas changes.
To bid and work on construction projects in Arkansas that cost $20,000 or more, you must obtain a contractor's license. The state may change amount.
Business and Law
License Information
Scope – Tests a candidate’s knowledge of business organization and operation, contractual agreements, license law, risk management, employer laws and regulations, financial management, tax law, lien law, and OSHA regulations.
Examination Outline
Open Book
50 Questions - Two-hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Business Organization and Management 6
Licensing 8
Estimating and Bidding 8
Contracts 12
Project Management 12
Risk Management 6
Safety - OSHA 6
Labor Laws 16
Financial Management 10
Tax Laws 10
Lien Laws 6
References
NOTE: The following references were used to develop this exam. You may use older editions of references at your own discretion. However, older editions may or may not contain applicable information to the content on the exam. You assume the risk of using an older reference than that listed below.
The following references are allowed in the test center.
1. Business, Law and Management Manual
2. IRS Circular E, Employer’s Tax Guide
GENERAL CONSTRUCTION
License Information
Scope – Tests a candidate’s knowledge of the construction, repair, alteration, remodeling, addition to, subtraction from, improvement, and demolition of any building or structure including related improvements to real estate excluding electrical, mechanical, plumbing, and liquefied petroleum gas work related.
Examination Outline
Open Book
100 Questions - 4 hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Plan Reading and Estimating 15
Building Codes 4
Sitework 6
Concrete 10
Concrete Formwork 6
Concrete Reinforcing 5
Masonry 7
Steel 8
Carpentry 8
Wood and Metal Framing 10
Roofing 6
Gypsum 5
Safety 10
References
NOTE: The following references were used to develop this exam. With the exception of the Code books, you may use newer editions of references as they become available at your own discretion.However, newer editions may or may not contain applicable information to the content on the exam. You assume the risk of using a more current reference than that listed below. In regards to Code books, only the edition of the Code book listed below will be allowed into the test site.
The following references are allowed in the testing center.
1. Building Code
2. 29 CFR 1926 OSHA
3. Building Code Structural Concrete and Commentary
4. Standard for Cold-Formed Steel Framing – Prescriptive Method for One-and-Two-Family Dwellings
The following references were used to create exam questions but are not allowed in the testing center.
1. OSHA
2. Carpenters and Builders Math, Plans, and Specifications
3. Carpentry and Building Construction
4. Principles Commercial Construction
5. Building Estimator’s Book
BUILDING CONSTRUCTION
License Information
Scope – Tests a candidate’s knowledge of the construction of commercial buildings, single- and multiple-unit residential dwellings, and accessory-use structures, all of which shall not exceed three stories in height and does not include any electrical, mechanical, plumbing, or liquefied petroleum gas work.
Examination Outline
Open Book
100 Questions - 4 hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Preconstruction Preparation and Planning 7
Sitework 10
Concrete and Masonry Fundamentals 16
Formwork, Footings and Foundations 17
Exterior Framing and Finishing 25
Interior Framing and Finishing 15
Workplace Safety 10
References
NOTE: The following references were used to develop this exam. With the exception of the Code books, you may use newer editions of references as they become available at your own discretion.However, newer editions may or may not contain applicable information to the content on the exam. You assume the risk of using a more current reference than that listed below. In regards to Code books, only the edition of the Code book listed below will be allowed into the test site.
The following references are allowed in the testing center.
1. Building Code
2. 29 CFR 1926 OSHA
The following references were used to create exam questions but are not allowed in the testing center.
1. OSHA
2. Carpentry
3. Masonry
4. Principles of Commercial Construction
5. Concrete Construction
RESIDENTIAL CONSTRUCTION
License Information
Scope – Tests a candidate’s knowledge of construction, remodeling, repair, and improvement of single or multiple residential dwelling units as defined by the building code.
Examination Outline
Open Book
100 Questions - 4 hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Plan Reading and Estimating 13
Sitework 7
Foundations 6
Concrete 12
Concrete Reinforcement 7
Masonry 7
Carpentry 14
Framing 10
Roofing 8
Gypsum 6
Safety - OSHA 10
References
NOTE: The following references were used to develop this exam. With the exception of the Code books, you may use newer editions of references as they become available at your own discretion.However, newer editions may or may not contain applicable information to the content on the exam. You assume the risk of using a more current reference than that listed below. In regards to Code books, only the edition of the Code book listed below will be allowed into the test site.
The following references are allowed in the testing center.
1. Residential Code for One- and Two-Family Dwellings
2. 29 CFR 1926 OSHA
3. Requirements for Structural Concrete
The following references were used to create exam questions but are not allowed in the testing center.
1. OSHA
2. Carpenters and Builders Math, Plans, and Specifications
3. Carpentry and Building Construction
CARPENTRY
License Information
Scope – Tests a candidate’s knowledge of light and heavy carpentry, rough framing, trusses, sheathing, metal framing, paneling, trim, cabinetry, doors, windows, stairs, and incidental hardware.
Examination Outline
Open Book
50 Questions - 2 hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Plan Reading 10
Wood Framing 18
Metal Framing 12
Stairs 8
Doors and Windows 12
Cabinetry 8
Interior Finish 10
Exterior Finish 10
Safety 12
References
NOTE: The following references were used to develop this exam. With the exception of the Code books, you may use newer editions of references as they become available at your own discretion.However, newer editions may or may not contain applicable information to the content on the exam. You assume the risk of using a more current reference than that listed below. In regards to Code books, only the edition of the Code book listed below will be allowed into the test site.
The following references are allowed in the testing center.
1. Building Code
2. 29 CFR 1926 OSHA
The following references were used to create exam questions but are not allowed in the testing center.
1. 29 CFR 1926 OSHA
2. Carpentry and Building Construction.
CONCRETE
License Information
Scope – Tests a candidate’s knowledge of concrete work, including formwork, placement of steel reinforcement, batching, mixing, delivery, placing, finishing, and curing.
Examination Outline
Open Book
50 Questions – 2-1/2 hour time limit
70% or 75% Correct Required to Pass
Exam Topic %
Planning and Estimating 10
Earthwork 6
Foundations and Formwork 30
Reinforcing Steel 14
Concrete 30
Safety-OSHA 10
References
NOTE: The following references were used to develop this exam. With the exception of the Code books, you may use newer editions of references as they become available at your own discretion.However, newer editions may or may not contain applicable information to the content on the exam. You assume the risk of using a more current reference than that listed below. In regards to Code books, only the edition of the Code book listed below will be allowed into the test site.
The following references are allowed in the testing center.
1. Residential Code for One- and Two-Family Dwellings
2. 29 CFR 1926 OSHA
The following references were used to create exam questions but are not allowed in the testing center.
1. Federal Regulations
2. Formwork for Concrete
3. Quality Concrete Construction
DRYWALL
License Information
Scope – Tests a candidate’s knowledge of installation of gypsum drywall products to wood and metal studs, wood and steel joists, and metal runners, including the preparation of the surface over which the drywall product is to be applied, and the placement of metal studs, runners, and all necessary trim.
Examination Outline
Open Book
50 Questions – 2-1/2 hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Plan Reading and Estimating 14
Framing 16
Substrate 14
Application 16
Finishing 14
Texturing 10
Safety – OSHA 16
References
NOTE: The following references were used to develop this exam. With the exception of the Code books, you may use newer editions of references as they become available at your own discretion.However, newer editions may or may not contain applicable information to the content on the exam. You assume the risk of using a more current reference than that listed below. In regards to Code books, only the edition of the Code book listed below will be allowed into the test site.
The following references are allowed in the testing center.
1. Building Code
2. Residential Code for One- and Two-Family Dwellings
3. 29 CFR 1926 OSHA
The following references were used to create exam questions but are not allowed in the testing center.
1. Federal Regulations
2. Gypsum Construction
3. Specifications and Finishing of Gypsum Panel Products
DRYWALL and PLASTER
License Information
Scope – Tests a candidate’s knowledge of installation of drywall and plaster products to wood and metal studs, wood and steel joists, and metal runners, including the preparation of the surface over which the products are to be applied, and the placement of metal studs, runners, and all necessary trim.
Examination Outline
Open Book
50 Questions – 2 hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Plan Reading and Estimating 16
Framing 14
Lathing 14
Gypsum Board Application 14
Plaster/Cement 12
Finishing/Texturing 14
Safety – OSHA 16
References
NOTE: The following references were used to develop this exam. With the exception of the Code books, you may use newer editions of references as they become available at your own discretion.However, newer editions may or may not contain applicable information to the content on the exam. You assume the risk of using a more current reference than that listed below. In regards to Code books, only the edition of the Code book listed below will be allowed into the test site.
The following references are allowed in the testing center.
1. Building Code
2. 29 CFR 1926 OSHA
The following references were used to create exam questions but are not allowed in the testing center.
1. Federal Regulations
2. Specification for Installation of Interior Lathing and Furring
3. Gypsum Construction
4. Modern Carpentry
5. Specifications, Application and Finishing of Gypsum Panel
GLAZING
License Information
Scope- Tests a candidate’s knowledge of the selection, cutting, assemblage, installation of all makes, kinds of glass, glasswork, including mirrors, tubs and shower enclosures.
Examination Outline
Open Book
50 Questions – Three-hour time limit
70% to 75% Correct Required to Pass
SUBJECT AREA PERCENTAGE
PLAN READING 10
GLASS 32
PLASTICS 6
TUB/SHOWER ENCLOSURES 4
CURTAIN WALLS 14
MIRRORS 4
SEALANTS 24
SAFETY, CODE OF FEDERAL REGULATIONS 6
References
The following references are allowed in the testing center:
1. Federal Regulations
2. OSHA Excerpts
The following references have been used to create exam questions but are not allowed in the testing center:
1. Glazing Manual
2. Sealant Manual
3. Carpentry
MASONRY
License Information
Scope – Tests a candidate’s knowledge of the selection, cutting, and laying of brick, stone, and masonry products. This includes structural glass brick or block, insulated concrete units, and the placement of reinforcing steel, including concrete forming and placing incorporated into the masonry work.
Examination Outline
Open Book
50 Questions – 2-1/2 hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Plan Reading and Estimating 10
Concrete Block 14
Brick 14
Stone 6
Glass Block 6
Mortar and Grout 20
Insulated Concrete Units 6
Reinforcing Steel 6
Concrete 8
Safety - OSHA 10
References
NOTE: The following references were used to develop this exam. With the exception of the Code books, you may use newer editions of references as they become available at your own discretion.However, newer editions may or may not contain applicable information to the content on the exam. You assume the risk of using a more current reference than that listed below. In regards to Code books, only the edition of the Code book listed below will be allowed into the test site.
The following references are allowed in the testing center.
1. Building Code
2. 29 CFR 1926 OSHA
The following references were used to create exam questions but are not allowed in the testing center.
1. Federal Regulations
2. Masonry
SIGN INSTALLATION
(Non-Electric)
License Information
Scope- Testing a candidate’s knowledge of installation, repair, and modification of non-electric signs.
Examination Outline
Open Book
50 Questions – 2-1/2-hour time limit
70% to 75% Correct Required to Pass
SUBJECT AREA PERCENTAGE
PLAN READING AND ESTIMATING 10
SITEWORK 8
CONCRETE 12
CONCRETE REINFORCEMENT 8
MASONRY 8
WOOD 8
STRUCTURAL STEEL 12
WELDING 8
STRUCTURES 16
SAFETY-OSHA 10
References
The following references are allowed in the testing center:
1. Building Code
2. Federal Regulations AND/OR OSHA Excerpts
The following references have been used to create exam questions but are not allowed in the testing center:
1. Concrete Construction
2. Fundamentals of Building
Painting and Decorating
License Information
Scope-Tests a candidate’s knowledge of painting and the application of both paper and fabric coverings for residential, commercial, and industrial facilities, and all other superstructures, including surface preparation and related repairs to already installed surfaces.
Examination Outline
Open Book
60 Questions – Three-hour time limit
70% to 75% Correct Required to Pass
SUBJECT AREA PERCENTAGE
PLAN READING 3
TOOLS AND EQUIPMENT 8
SAFETY-OSHA 10
SURFACE PREPARATION 22
SANDBLASTING 10
PRESSURE WASHING 3
COATING MATERIALS 8
COATING APPLICATION 15
WALLCOVERING 7
WATERPROOFING 7
DAMPPROOFING 7
References
The following references are allowed in the testing center:
1. Federal Regulations and or OSHA Excerpts
The following references have been used to create exam questions but are not allowed in the testing center:
1. Painting and Decorating Manual
2. Construction Waterproofing
3. Safe and Efficient Sandblasting
4. Building Estimator’s Book
EXTERIOR SURFACE COATING
License Information
Scope- Tests a candidate’s knowledge of the application of a mixture of sand or other aggregates, or Portland Cement and water, and similar exterior finishing systems.
Examination Outline
Open Book
50 Questions – 2-hour time limit
70% to 75% Correct Required to Pass
SUBJECT AREA PERCENTAGE
PLAN READING AND ESTIMATING 16
FRAMING 12
LATHING AND SUBSTRATE 14
CEMENT 14
PLASTER 24
SAFETY - OSHA 20
References
The following references are allowed in the testing center:
1. Building Code
2. Federal Regulations AND/OR OSHA Excerpts
The following references have been used to create exam questions but are not allowed in the testing center:
1. Specification for Installation of Load Bearing
2. Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel
3. Specification for Installation of Interior Lathing and Furring
4. Specification for Application of Interior Gypsum Plaster
5. Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
6. Gypsum Construction
7. Carpentry
8. Portland Cement Plaster/Stucco Manual
ROOFING
License Information
Scope – Tests a candidate’s knowledge of the installation, repair, and replacement of roof coverings, including roof deck insulation, roof coating, painting, covering, use of sheet metal products incidental to roofing work or other related material, and installation of nonstructural decking and siding.
Examination Outline
Open Book
50 Questions – 2-1/2 hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Estimating and Plan Reading 12
Substrate 12
Steep Slope 22
Low Slope Membrane 28
Metal 8
Coatings and Sprayed Foam 8
Safety - OSHA 10
References
NOTE: The following references were used to develop this exam. With the exception of the Code books, you may use newer editions of references as they become available at your own discretion.However, newer editions may or may not contain applicable information to the content on the exam. You assume the risk of using a more current reference than that listed below. In regards to Code books, only the edition of the Code book listed below will be allowed into the test site.
The following references are allowed in the testing center.
1. Building Code
2. 29 CFR 1926 OSHA
The following references were used to create exam questions but are not allowed in the testing center.
1. Federal Regulations
2. Metal Flashing, Condensation Control and Reroofing
5. Membrane Roof Systems
6. Metal Panel and SPF Roof Systems
7. Steep-Slope Roof Systems
LIMITED ROOFING
License Information
Scope – Tests a candidate’s knowledge of the installation, repair, and replacement of steep roof coverings, including the fabrication and installation of sheet metal incidental to steep coverings, and installation of shingles, shakes, roll roofing materials, tile, slate, and other prefabricated shingle products.
Examination Outline
Open Book
50 Questions – 2-1/2 hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Estimating and Plan Reading 12
Substrate 14
Steep Slope 48
Low Slope 8
Repairs 8
Safety – OSHA 10
References
NOTE: The following references were used to develop this exam. With the exception of the Code books, you may use newer editions of references as they become available at your own discretion.However, newer editions may or may not contain applicable information to the content on the exam. You assume the risk of using a more current reference than that listed below. In regards to Code books, only the edition of the Code book listed below will be allowed into the test site.
The following references are allowed in the testing center.
1. Building Code
2. 29 CFR 1926 OSHA.
The following references were used to create exam questions but are not allowed in the testing center.
1. Federal Regulations
2. Architectural Metal Flashing
3. Membrane Roof Systems
4. Metal Panel and SPF Roof Systems
5. Steep-Slope Roof Systems
STRUCTURAL STEEL ERECTION
License Information
Scope- Tests a candidate’s knowledge of the erection of structural steel shapes and plates, including such minor field fabrication as may be necessary, of any profile, perimeter, or cross-section that are or may be used as structural members for buildings and structures, including related metal decking, siding, joists, riveting, welding, and rigging.
Examination Outline
Open Book
50 Questions – Three-hour time limit
70% to 75% Correct Required to Pass
SUBJECT AREA PERCENTAGE
STRUCTURAL STEEL 20
WELDING 12
STRUCTURAL STEEL – BOLTING 8
METAL-DECKING 12
METAL-SIDING 6
METAL-JOISTS 10
RIGGING 12
SAFETY 10
ESTIMATING-PLAN READING 10
References
The following references are allowed in the testing center:
1. Federal Regulations and or OSHA Excerpts
The following references have been used to create exam questions but are not allowed in the testing center:
1. Standard Practice for Steel Buildings and Bridges
2. Handling and Erection of Steel Joists and Joist Girders Welding
3. Fundamentals of Building Construction
4. Rigging: For Construction and Industrial
5. Manual of Steel Construction
TILE
License Information
Scope-Tests candidate’s knowledge of setting all makes of tile and marble.
Examination Outline
Open Book
50 Questions – 2-1/2-hour time limit
70% to 75% Correct Required to Pass
SUBJECT AREA PERCENTAGE
PLAN READING AND ESTIMATING 12
SUBSTRATE 18
ADHESIVES 12
CERAMIC TILE 26
MARBLE 10
GROUT 12
SAFETY-OSHA 10
References
The following references are allowed in the testing center:
1. Federal Regulations and or OSHA Excerpts
The following references have been used to create exam questions but are not allowed in the testing center:
1. Installation of Ceramic Tile
2. Ceramic Tile Installation
3. Setting Tile
TILE and TERRAZZO
License Information
Scope-Tests candidate’s knowledge setting tile, marble and terrazzo
Examination Outline
Open Book
50 Questions – 2-1/2-hour time limit
70% to 75% Correct Required to Pass
SUBJECT AREA PERCENTAGE
PLAN READING AND ESTIMATING 8
SUBSTRATE-TERRAZZO 8
SUBSTRATE-TILE AND MARBLE 10
TERRAZZO 16
CERAMIC TILE 30
MARBLE 10
GROUT 8
SAFETY-OSHA 10
References
The following references are allowed in the testing center:
1. Federal Regulations and or OSHA Excerpts
The following references have been used to create exam questions but are not allowed in the testing center:
Installation of Ceramic Tile
Terrazzo Specification and Design
Ceramic Tile Installation
Setting Tile
BUILDING MAINTENANCE
License Information
Scope – Tests a candidate’s knowledge of the performance of maintenance and repair of existing buildings and structures, including the application or installation of drywall, plaster, wood, and paint. Exam does not include mechanical, plumbing, electrical, or roofing components.
Examination Outline
Open Book
50 Questions – 2-1/2 hour time limit
70% to 75% Correct Required to Pass
Exam Topic %
Concrete 10
Stucco 10
Doors and Windows 10
Framing 12
Drywall 12
Painting 16
| 
